Table of Contents
Advertisement
Receiving Both Faxes and Telephone Calls Automatically:
Fax/Tel Mode
Set this mode if you want your MultiPASS to automatically switch between voice
and fax calls. For this mode, you need to have a telephone connected to your unit.
What Happens When Fax/Tel Mode is Selected
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting =15 sec.)
RECEIVE (factory default setting) and DISCONNECT.
Not all fax machines are capable of sending a fax
tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the MultiPASS switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approximately 55 seconds.
You can select these options using the MultiPASS Fax Setup Utility or the operation
panel. If you are using the MultiPASS Fax Setup Utility, see the online MultiPASS
Desktop Manager Software Guide. If you are using the operation panel, see the
online Standalone Fax Manual.
Receiving Faxes
5-4
Telephone
Sending document
The MultiPASS answers without ringing.
The MultiPASS listens for the fax tone.
(For 8 sec.)
The fax tone is not detected.
The MultiPASS starts ringing.
If you don't pick up the handset
(within 15 sec.).
DEFAULT ACTION
Choose between:
RECEIVE
(Factory default setting)
Fax
Sending document
manually
The fax tone
is detected.
received automatically .
(The fax tone is
detected and the
MultiPASS switches
to receive mode.)
The MultiPASS
disconnects the call.
Fax
automatically
The document is
Pick up the
handset to talk.
DISCONNECT
Chapter 5
Advertisement
Table of Contents
