1. Open the document tray.
2. Prepare the document and load it, facedown, in the Automatic Document Feeder (ADF).
I
I
I
I
3. Dial the other party's fax number.
I
I
I
Chapter 5
The LCD display shows the following:
Currently used memory:
Standby to scan:
If you are sending in color to a fax machine with color capability, press
turn on its light.
If necessary, you can adjust the resolution and contrast.
You may not be able to use memory sending if the percentage shown in the MEMORY
USED display is close to 100%. In this case, use manual sending to send your document.
Use one of the dialing methods described earlier in this chapter.
Ex:
TEL=
9p7654321
If you enter the wrong number, press
If you must first dial a digit to get an outside line (9 for example), add a pause after that
digit by pressing
Redial/Pause
MEMORY USED
0%
DOCUMENT READY
, then enter the correct number.
Stop
.
to
Color/B&W
Sending Faxes
5-10