Canon MultiPASS C560 User Manual page 334

Error Correction Mode (ECM) may be disabled.
I
Make sure ECM is on. (If you are using the Desktop Manager, see the MultiPASS Desktop
Manager Software Guide. If you are using the operation panel, see the Stand-alone Fax
Manual.)
Faxes do not print.
The orange tape may not be removed from the BJ cartridge.
I
Be sure to remove the orange tape from the BJ cartridge before you install it (see
The BJ cartridge or an ink tank may not be installed properly.
I
Make sure the BJ cartridge and the ink tank(s) are installed properly (see
The BJ cartridge print head may need cleaning.
I
Clean the BJ cartridge print head (see
The BJ cartridge or the ink tank(s) may need to be replaced.
I
Replace the BJ cartridge or the ink tank(s) (see
Fax images print blotched or uneven.
The telephone lines may be in poor condition, or you may have a bad connection.
I
Error Correction Mode (ECM) sending/receiving should eliminate such problems. However, if
the telephone lines are in poor condition, you may have to try again.
Chapter 8
page 7-20).
pages 7-23 and 7-33).
page 7-29).
page 7-23).
Troubleshooting 8-39