Canon MultiPASS C560 User Manual page 215

You can set the Automatic Redialing features through the MultiPASS Desktop Manager or the
operation panel. If you are using the MultiPASS Desktop Manager, see the online MultiPASS
Desktop Manager Software Guide. If you are using the operation panel, see the online Stand-alone
Fax Manual.
When using automatic redialing, the LCD display alternately displays AUTO REDIAL and the
transaction number (TX/RX NO.) while it is waiting to redial.
When it begins redialing, the LCD display shows details on the transmission.
If the receiving fax machine is still busy on the last attempt, the LCD display shows BUSY/NO
SIGNAL, the transaction number (TX/RX NO.), and prints the Error TX report (if set to print
one).
If this happens, try sending again later.
Chapter 5
AUTO REDIAL
Ex:
TX/RX NO. 0013
BUSY/NO SIGNAL
Ex:
TX/RX NO. 0013
PRINTING REPORT
Sending Faxes 5-20