Canon MultiPASS C560 User Manual page 159

To prepare your MultiPASS printer for banner printing:
1. Make sure the paper rest is extended.
2. Make sure the paper thickness lever is set to the left.
3. Insert the banner paper into the printer. Make sure that you insert the first page so that the
fold between the first and second pages is facing up.
4. Verify that the side of the paper that is facing up is the side on which you want the banner
to appear.
5. Raise both paper output guides to a vertical position.
To set your banner printing options and print your banner:
1. From within the application that you used to create the banner, click the Print command.
2. In the Print dialog box, under Print Range, specify the range of the pages to print.
Remember that you cannot print on the first page of your banner paper. Thus, if you want
to print a banner that is the maximum length, under Print Range, specify printing from
page 2 to page 6 for a total of five actual printed pages.
3. Click Properties.
4. In the Printer Properties dialog box, on the Main tab, select the print mode.
5. Click Change.
Chapter 3 Printing 3-62