Receiving Documents Automatically—Fax Only Mode; Receiving Both Documents And Telephone Calls Automatically—Fax/Tel Mode - Canon MultiPASS C3000 User Manual

Receiving Documents Automatically—Fax Only Mode

When you set up the MultiPASS C3000 for a dedicated fax line, the unit
automatically receives the document whenever a call comes over the fax
line. It disconnects any calls that are not from a fax machine.
Receiving Both Documents and Telephone Calls
Automatically—Fax/Tel Mode
In Fax/Tel Mode, the MultiPASS C3000 monitors all incoming calls over
the telephone line. When the MultiPASS C3000 receives an incoming
call, it checks to see if the call is from another fax machine trying to send
a document or from someone wanting to talk to you. You must have a
telephone connected to the MultiPASS C3000 to use this mode.
How Fax/Tel Mode Works
In Fax/Tel
a call from another fax machine that is trying to send a document.
This is so that you are not disturbed when your MultiPASS C3000 is
communicating with another fax machine. The unit automatically
receives the document.
If the call is from a person, the MultiPASS C3000 rings to alert you to
pick up the phone. You must pick up the telephone connected to the
MultiPASS C3000.
If you do not pick up the telephone connected to the MultiPASS C3000
within 15 seconds (set by the Ring Time option), the unit stops ringing.
It checks again to make sure the call is not from a fax machine and then
hangs up.
N
The MultiPASS C3000 does not recognize an extension telephone
connected to another phone jack (that is, not connected to the
MultiPASS C3000).
If a call comes in and you pick up an extension phone, the MultiPASS
C3000 will continue to ring for 15 seconds, check for a fax, and then
hang up.
5-2 Receiving Faxes
Mode, , the MultiPASS C3000 does not ring when it receives
Chapter 5