Canon MultiPASS C560 User Manual page 310

Message Error Code
INSTALL
BC21e/20
(Continued)
LINE IN USE
LOAD PAPER
MEMORY FULL
MEMORY FULL
PLEASE WAIT
(two messages
toggle)
Chapter 8
Cause
You tried to print a received black &
white fax, print a report, or print a
black & white document in memory
with a BC-22e Photo BJ Cartridge
installed.
—
The unit is set for Fax/Tel Mode and
you are receiving a telephone call.
—
The multi-purpose tray is empty.
#037
The unit's memory is full because it
has received too many documents,
or a very long or detailed document.
Memory is full because you tried to
send too many pages at once, or a
very long or detailed document.
—
The unit is sending a document and
its memory is full.
Action
Remove the BC-22e Photo BJ
Cartridge and install the BC-21e Color
or BC-20 Black BJ Cartridge (see
7-23).
Answer the call.
Load paper in the multi-purpose tray
(see page 2-17). Make sure the stack
does not exceed the paper limit mark
( ). Then press the
Resume
Print out any documents that are
stored in memory (see page
Then start the operation again.
Divide the document and send each
part separately. To free the unit's
memory, print or delete any faxes in
memory you no longer need (see
5-29 and 5-34).
If sending a document, the unit
continues to send the fax as memory
becomes available.
Troubleshooting
page
button.
5-29).
pages
8-15