Chainstay - Guide Tube Assembly: Alloy Frame - Specialized LEVO 2022 Technical Manual

CHAINSTAY - GUIDE TUBE ASSEMBLY: ALLOY FRAME

REAR BRAKE
DERAILLEUR
# PART NAME PART NUMBER
A
Chainstay Alloy (Satin Black) S211500002
B
Sidearm Cable Guide S226500007
ALLOY FRAME CHAINSTAY GUIDE TUBE ASSEMBLY PROCESS:
Before assembling the rear triangle, insert the guide tubes for the rear brake and the derailleur.
„ 1: Insert the derailleur guide tube through the ICR port located in the drive side of the chainstay and route it to the rear port on the chainstay.
2: Insert the brake guide tube through the inner ICR port located in the non-drive side of the chainstay and route it to the mid port on the
„
chainstay.
2022
TECHNICAL GUIDE
A
QTY SPEC TOOL
1 N/A
1 Plastic Sidearm Cover N/A
2
3
1
6
TORQUE ALLOY FRAME GUIDE TUBE
LENGTH
Nm in-lbf
REAR DERAILLEUER TUBE
N/A N/A
REAR BRAKE TUBE
N/A N/A
DROPPER GUIDE TUBE
3: Guide the derailleur and brake guide tubes up the seat tube and up into the sidearm, exiting out the port on the sidearm.
„
4: Feed the rear brake guide tube through the top hole of the cable guide holder in the sidearm cover
„
5: Feed the derailleur guide tube through the lower hole of the cable guide holder in the sidearm cover
„
„ 6: Secure the two guide tubes together using a cabletie.
B
4
5
S1 S2 S3
780 mm 780 mm 780 mm 780 mm
660 mm 660 mm 660 mm 660 mm
385 mm 395 mm 410 mm 430 mm
26.982
S4 S5 S6
780 mm 780 mm
660 mm 660 mm
465 mm 460 mm
8
PAGE