S E At P O S T C L A M - Specialized LEVO 2022 Technical Manual

SEATPOST CLAMP
MAX MIN
SIZE
INSERTION INSERTION
S1 210 mm
S2 220 mm
S3 240 mm
100 mm
S4 260 mm
S5 280 mm
S6 295 mm
# PART NAME PART NUMBER
Seatpost Shim S174900001
Seatpost Collar S184700004
SEATPOST MINIMUM INSERTION:
Both the frame and seatpost have minimum insertion requirements. In addition, the frame has a maximum insertion requirement to prevent
damage to the frame and seatpost.
MINIMUM INSERTION: The seatpost must be inserted into the frame deep enough so the minimum insertion/maximum extension (min/max)
„
mark on the seatpost is not visible. The frame requires a minimum of 100 mm of insertion.
MAXIMUM INSERTION: The seat tube is reamed to a specified maximum insertion depth for each frame size. This ream depth limits the
„
insertion depth of the seatpost. Please refer to the table in Fig.6.1.
2022
TECHNICAL GUIDE
2 B
1 A
MAX
QTY SPEC
1 34.9 mm / 30.9 mm Seatpost Shim
1 38.6 mm Seatpost Collar
TORQUE
TOOL
Nm in-lbf
N/A N/A N/A
4 mm 6.2 55
Align with the bolt facing forwards
If the desired seat height cannot be achieved within the minimum and maximum insertion requirements, the seatpost should be replaced for a
„
shorter or longer one.
The Levo is equipped with a seat post stopper located on the rear of the seat tube. The stopper is designed to stop the seatpost
from being inserted too far and impacting the motor.
The seat tube is designed for a 34.9 mm post but a smaller diameter seatpost can be used with a shim.
1
COMMENT
37
PAGE