C H A I N S Tay - G U I D E T U B E A S S E M B Ly - Specialized LEVO 2022 Technical Manual

CHAINSTAY - GUIDE TUBE ASSEMBLY: CARBON FRAME
3
REAR BRAKE
DERAILLEUR
# PART NAME PART NUMBER
A
Chainstay Carbon (Gloss Carbon)
S211500003
B
Bearing
CARBON FRAME CHAINSTAY GUIDE TUBE ASSEMBLY PROCESS:
Before assembling the rear triangle, insert the guide tubes for the rear brake and the derailleur.
„ 1: Insert the derailleur guide tube through the ICR port located in the drive side of the chainstay and route it to the rear port on the chainstay.
2: Insert the brake guide tube through the inner ICR port located in the non-drive side of the chainstay and route it to the mid port on the
„
chainstay.
2022
TECHNICAL GUIDE
QTY SPEC TOOL
1 N/A
2 N/A
12 mm ID x 24 mm OD x 6 mm W,DBL SLD
1
4
TORQUE
GUIDE TUBE LENGTH
Nm in-lbf
REAR DERAILLEUER TUBE
N/A N/A
REAR BRAKE TUBE
N/A N/A
DROPPER GUIDE TUBE
3: Glue one end of the guide tubes into the ICR guide base with a small drop of glue (Loctite 416). Briefly allow the glue to spread around the
„
guide tube, then quickly insert them into the ICR guide hole.
TECH TIP: Loctite 416 has a 20-30 second work time. Ensure the guide tube is completely inserted into the ICR guide. Failure
to do so will cause housings to snag.
TECH TIP: Secure the guide tubes 10 cm from the ICR ports on the chainstay with a cable tie.
A
3
S1 S2 S3
1070 mm 1105 mm 1125 mm 1145 mm
925 mm 960 mm 980 mm 1000 mm
385 mm 395 mm 410 mm
<
30
sec
NYLON ICR TUBE
S4 S5 S6
1190 mm 1205 mm
1045 mm 1060 mm
430 mm 465 mm 480 mm
7
PAGE