Making Advanced Adjustment (Auto Fleshtone) (Sx800); Adjusting Fine Color Adjustment (6-Axis Color Adjust) (Sx80 Ii) - Canon REALiS SX800 User Manual

Setting the Image Quality
Making Advanced Adjustment (Auto flesh-
tone) (SX800)
[Advanced adjustment] - [Auto fleshtone]
ANALOG PC
COMPONENT
VIDEO
Advanced adjustment
Auto fleshtone
You can represent the skin color impres-
sively.
Off Disables the [Auto fleshtone] function.
L Specifies the intensity of the [Auto flesh-
M tone] in three steps.
H
Press the OK button to accept your setting
and then press the MENU button.
• The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting Fine Color Adjustment (6-axis
color adjust) (SX80 II)
[Advanced adjustment] - [6-axis color adjust]
Image adjustment
You can make fine color adjustment with
RGB (red, green, blue) and CMY (cyan,
magenta, yellow). For the details of 6-axis
color adjust, refer to the page 155.
Off
Adjust
Reset
When you have completed the adjust-
ment, press the MENU button.
• [Off] is the factory default.
• The adjustment you have made is
100
HDMI
DIGITAL PC
ANALOG PC
Advanced adjustment
6-axis color adjust
Disables the 6-axis color adjustment.
If you select [Adjust], the previous set-
ting of 6-axis color adjustment
becomes active again.
Enables the 6-axis color adjustment.
Use [ ] / [ ] to select [
Saturation], then adjust them with [<] /
[>].
Returns any adjustment values to zero.
stored as an adjusted value of input sig-
nals being projected in an image mode.
COMPONENT
VIDEO/S-VIDEO
USB
Image adjustment
Hue] or [