Setting The Image Quality; Selecting An Image Quality - Canon RealIS WUX10 User Manual

Setting the Image Quality

Selecting an Image Quality

[Image mode]
HDMI
DIGITAL PC
ANALOG PC
Image mode
You can select an image mode suitable for
the projecting image.
You can select it also with the IMAGE but-
ton on the remote control. (P61)
Press the OK button to accept your setting
and then press the MENU button.
• [Standard] is the factory default.
• You can decide the image quality by
adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],
[Advanced adjustment] and
[Lamp mode].
• The adjustment you have made is
stored as each combination of input sig-
nals and an image mode.
COMPONENT
VIDEO
Image adjustment
85
Standard Select this to project an image
with near-original quality and a
high regard for reproduction of
white. It is suited to showing a
computer screen or watching
visual software (moving pic-
tures) in a bright room.
Presentation Select this to project an image
with quality suited for the presen-
tation. It is also suited to project
visual software (moving pic-
tures) with a high regard for the
brightness.
Movie Select this to project moving pic-
tures of all kinds. Its brightness is
suited to easily enjoy the atmo-
sphere of a movie theatre in a
dim room.
sRGB Select this if you want to project
an image in the display mode
conforming to the sRGB stan-
dard (P130). It is suited to project
an image shot by sRGB-compati-
ble digital camera.