Section 3
HMI500
3.9.2
3.9.3
3.9.4
68
File verification
Starts the file verification procedure, that checks data consistency within several
tables of the project file. The result is displayed in a separate window.
Reports
Figure 54
Reports
The "Reports" dialog is opened by selecting "Reports" in the "Tools" menu. It
contains a list of the various kinds of reports.
Either a desired report can be printed on its own or all the reports can be printed by
activating the "Print all reports" check box.
The difference between the options in the "Printing quality" field is that the data
are presented in tabular form if the "Normal" radio button is active.
Unless a printer is actually installed on the PC, the "Reports" menu item is grey
and inactive. A printer does not, however, have to be connected.
Export SCS data
This menu item exports any communication data contained in the database. The
menu is only active if under menu "Configuration \ Communication" a SCS
interface is configured (see 3.6.1).
1MRK 500 124-UEN
Operation Manual
Distributed busbar protection REB500