Section 3
HMI500
3.6.4.3
3.6.4.4
50
Export IID / CID File
The configuration file which is passed to the system configuration tool can be
created from the "Tools / Export SCS data" menu. The Export button starts the
export.
Figure 35
Tools / Export SCS data
A successful export is indicated by the "SCS data exported" message box.
Additionally the location of the configuration file is shown.
Figure 36
SCS Data exported
Import GOOSE Attributes
The "Configuration / SCS Configuration – IEC 61850-8-1 options – Import
GOOSE data attributes" button opens a file open dialog. It is used to select the
Station Configuration File (SCD) which has been created by a system engineering
tool. GOOSE data attributes, which can be mapped to REB500 Signals, are
imported from the Station Configuration File.
1MRK 500 124-UEN
Operation Manual
Distributed busbar protection REB500