ABB REB500 Operation Manual page 57

Hide thumbs Also See for REB500:

Table of Contents

1MRK 500 124-UEN

3.6.4.2

Operation Manual

Distributed busbar protection REB500

Enabling GOOSE Client

This section describes the pre-configuration of the GOOSE Client.

Figure 34

Configuration / Binary module - Inputs – Details– Contact mode

The GOOSE Client is enabled if at least one of the REB500 input signals has been

configured as "GOOSE input". The Radio Button "GOOSE input" is only available

for specific REB500 signals. The "Assign" Button is enabled after the Station

configuration file (SCD) has been imported.

Section 3

HMI500

Table of Contents