Satellite Reception - Racelogic Performance Box Touch V2 Quick Start Manual

Satellite Reception

Performance Box Touch has an internal patch antenna.
This means that, in many circumstances, the unit does
not require an external antenna if it has a clear view of
the sky without any interference (e.g. roof bars,
athermic windscreen, windscreen wipers). However, if
you are struggling to maintain a stable satellite lock
(indicated by a flashing red satellite icon), you can use
an external antenna (RLACS284).
IMPORTANT
The first time you use the unit, it may take 10 to 15 minutes to acquire satellites fully. After this, it will usually
only take 1 to 2 minutes to acquire satellites.
External Antenna (If Required)
The placement of the GNSS antenna is crucial to the quality of the data recorded by Performance Box Touch. Any
metal close to a GNSS antenna can unpredictably disturb the signal due to interference from reflections of weak
GNSS signals.
For best results, use the antenna in the centre of a metal roof at least 5 cm away from any roof bars or radio
antennas. Do not mount the antenna close to the edge of the roof as reflections from the ground may interfere with
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Decel_Mode_-
_Performance_Box_Touch_V2
8