Selecting A Test - Racelogic Performance Box Touch V2 Quick Start Manual

Decel Mode Overview
The Deceleration screen displays current and completed test information.
The screen is split into 2 halves:
• Left-hand side: This includes a live-speed display which always shows the current speed of the
vehicle irrespective of any test start or end conditions. If the vehicle is travelling slower than 0.5 km/h or the
satellite lock is lost (less than 4 satellites), the value will display as 000.0.
• Right-hand side: This contains test information: Distance travelled, run number, time taken, average
deceleration achieved, maximum deceleration achieved (g) and height difference. These values will start to
populate once the start condition of the test is met. When the end condition is met, they will remain on screen
until the start condition is met again. You can reset a test by pressing the
screen.
Note: If you are using the battery, the Current Test header will not include units to make space for the battery status
indicator.

Selecting a Test

You can choose a Decel Test by pressing the
test options are then available on the right-hand side of the displayed screen.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Settings button on the bottom left of the screen. Preset and custom
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Decel_Mode_-
Reset button at the bottom of the
_Performance_Box_Touch_V2
13