Reduced Depth Top Mount Fan - Physical; Fan Requirements - Required; Figure 14-4: Chassis Cutout; Figure 14-5: Recessed Fan Mounting - Intel ATX 3.0 Design Manual

Figure 14-4: Chassis Cutout

Figure 14-5: Recessed Fan Mounting

14.5

Reduced Depth Top Mount Fan - Physical

Dimensions - REQUIRED
The power supply shall be enclosed and meet the physical outline shown in
14-6.
14.6

Fan Requirements - REQUIRED

The fan will draw air from the computer system cavity pressurizing the power supply
enclosure. The power supply enclosure shall exhaust the air through a grill located on
the rear panel. Refer to
helps to limit the acoustic noise of the unit.
The fan will be 80 mm.
78
Figure 14-7. Moving the fan to the computer system cavity
SFX12V Specific
Guidelines 4.0
Figure
336521