Serial Ata* Connectors - Required; Table 5-9: +12 V Power 8 Pin Connector Pin-Out; Table 5-10: Serial Ata* Power Connector Pin-Out - Intel ATX 3.0 Design Manual

Table 5-9: +12 V Power 8 pin Connector Pin-Out

Pin
1
2
3
4
NOTE: 18 AWG wire.
5.2.2.6 Serial ATA* Connectors – REQUIRED
This is a required connector for systems with Serial ATA devices.
The detailed requirements for the Serial ATA Power Connector can be found in the
"Serial ATA: High Speed Serialized AT Attachment" specification, Section 6.3 "Cables
and connector specification".
http://www.serialata.org/
Note: Connector pin numbers and wire numbers are not 1:1. Carefully check to confirm the
correct arrangement.
Assembly: Molex* 88751 or equivalent.

Table 5-10: Serial ATA* Power Connector Pin-out

Wire
5
4
3
2
1
NOTES:
1.
2.
56
Signal Color
COM Black
COM Black
COM Black
COM Black
Signal
+3.3V DC
COM
+5V DC
COM
+12V1 DC
18 AWG wire.
+3.3V DC is removed from SATA V3.2 spec. but it is recommended if there is backward
compatibility concern.
1 Pin
5
+12V2 DC
6
+12V2 DC
7
+12V2 DC
8
+12V2 DC
Color 1
Orange 2
Black
Red
Black
Yellow
Signal Color 1
Yellow
Yellow
Yellow
Yellow
Mechanical
336521