Preparing For Use; Unpacking And Checking; Preparing For Outdoor Usage; Setting Up Indoors - R&S TSMA6 Getting Started

®
R&S TSMA6
3

Preparing for use

Here, you can find basic information about setting up the product for the first time.
3.1

Unpacking and checking

1. Unpack the product carefully.
2. Retain the original packing material. Use it when transporting or shipping the
product later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
3.2

Preparing for outdoor usage

If you want to perform a walk test, the R&S TSMA6 needs weather protection
because the product casing is not waterproof. The R&S TSMA6-ZCB2 carrying
bag is especially designed for this purpose. See also
on page 6.
3.3

Setting up indoors

3.3.1

Placing the product on a bench top

If you want to set up the R&S TSMA6 on a benchtop or prepare the R&S TSMA6
for mobile use, proceed as follows.
Getting Started 4900.8040.02 ─ 10
Preparing for use
Setting up indoors
"Operating the product"
15