®
R&S
TSMA6
1. Connect the R&S TSMA6 LAN connector with an RJ45 cable to the LAN.
2. Configure the LAN port settings on the R&S TSMA6 via web-GUI in accord-
ance with your administrator guidelines. The IP address setting is shown in
the web-GUI (see R&S TSMA6 user manual).
The default IP setting is "DHCP" (configure IP address automatically).
3. Start a web browser on the remote device and enter the following URL:
http://TSMA6-<xxxxxx>.local (xxxxxx is the serial number of this specific R&S
TSMA6) or use the IP displayed from the local web-GUI.
Alternatively, use the assigned IP address for remote access (see web-GUI:
"Home" > "IP Settings").
The configuration web GUI of the R&S TSMA6 is started.
3.11
Connecting USB to LAN adapter TSPC-U2L2 /
TSPC-USL (optional)
Currently, the following LAN adapters are available.
● Dual Gbit LAN port adapter TSPC-U2L2
● Single Gbit LAN port adapter TSPC-U2L
For information how to connect an additional adapter and required driver updates,
see https://www.rohde-schwarz.com/driver/tsma6/.
For the connection of an external LAN adapter, the installation of the related
drivers is mandatory.
3.12
Connecting test mobile phones (optional)
When you connect a test mobile phone to a USB port for the first time, the instal-
lation of the appropriate drivers is mandatory.
Currently following driver is available.
● Samsung USB driver
Getting Started 4900.8040.02 ─ 10
Connecting test mobile phones (optional)
Preparing for use
28