Mounting The Product In A Rack; Considerations For Test Setup - R&S TSMA6 Getting Started

®
R&S TSMA6
To place the product on a bench top
1. Place the R&S TSMA6 on a stable, flat and level surface.
2. If you want to stack TSMx, proceed as described in the R&S TSMA6 user
manual.
3. If you want to stack the R&S TSMA6 together with other products:
a) Follow the instructions given for the other products.
b) Place the R&S TSMA6 on top.
3.3.2

Mounting the product in a rack

To mount the product in a rack
1. Use an adapter kit to prepare the product for rack mounting.
a) Order the rack adapter kit designed for the product. For the order number,
see data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Grab the product by the handles and push it onto the shelf until the rack
brackets fit closely to the rack.
3. Tighten all screws on the rack brackets with a tightening torque of 1.2 Nm to
secure the product in the rack.
3.4

Considerations for test setup

Electromagnetic interference (EMI) can affect the measurement results.
To suppress electromagnetic radiation during operation:
● Use high-quality shielded cables, for example, double-shielded RF and LAN
cables.
● Always terminate open cable ends.
● Ensure that connected external devices comply with EMC regulations.
Getting Started 4900.8040.02 ─ 10
Preparing for use
Considerations for test setup
16