®
R&S
TSMA6
2. Screw the collar screws on the top of the R&S TSMA6 with a Torx 8 screw
driver.
● Torque: 0.66 Nm ± 0.05 Nm
Figure 3-2: Collar screws
1 = Collar screws
3. Align the collar screws with the snap-in holes on the bottom of an R&S
TSMA6/6B and press the device down.
Getting Started 4900.8040.02 ─ 10
Preparing for use
Connecting to power
21