Labels On The Product - R&S TSMA6 Getting Started

®
R&S TSMA6
Using headphones
Take the following measures to prevent hearing damage. Before using head-
phones, check the volume and reduce it if necessary. If you monitor varying sig-
nal levels, take off the headphones and wait until the signal has settled. Then
adjust the volume.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
DC - direct current
Connect to a DC power supply of the specified voltage range.
1.2

Labels on the product

Labels on the casing inform about:
● Personal safety, see
● Product and environment safety, see
● Identification of the product, see bottom label of the R&S TSMA6.
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see
ing electrical and electronic equipment"
Labeling in line with directive 2006/66/EC for disposal of batteries after they have come
to the end of their service life. For more information, see
on page 39.
Take care when handling electrostatic sensitive devices.
Grounding terminal (earth ground contact)
Chassis grounding terminal
Getting Started 4900.8040.02 ─ 10
"Meaning of safety labels"
Table 1-1
Safety and regulatory information
on page 8
on page 39.
"Disposing batteries"
Labels on the product
"Dispos-
8