Preparing For Use - R&S ENV4200 User Manual

®
R&S ENV4200

3 Preparing for use

Here, you can find basic information about setting up the product for the first time.
3.1 Lifting and carrying
See
3.2 Unpacking and checking
1. Unpack the product carefully.
2. Retain the original packing material. Use it when transporting or shipping the prod-
uct later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact Rohde & Schwarz.
3.3 Choosing the operating site
Specific operating conditions ensure proper operation and avoid damage to the prod-
uct and connected devices. For information on environmental conditions such as ambi-
ent temperature and humidity, see the data sheet.
See also
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate the
product. The EMC class of the product is given in the data sheet under "General data".
3.4 Setting up the product
1. Place the product on a stable, flat, level and nonflammable surface.
2. NOTICE! Overheating can damage the product.
Prevent overheating as follows:
User Manual 1107.2470.12 ─ 04
"Lifting and carrying the product"
"Choosing the operating site"
on page 4.
on page 4.
Preparing for use
Setting up the product
15