Built-In Gps Receiver - R&S TSMA6 Getting Started

®
R&S TSMA6
The LAN interface can be used for the following scenarios.
●
Remote Control via web-GUI
●
Remote Control via Remote Desktop Connection
●
LAN interface in NESTOR Probe Mode
LAN port LEDs:
● left LED / yellow = link status
● right LED / green = activity status
HDMI Port
Connecting an external monitor. (max. resolution: 2560 x 1600 pixel)
RF IN Connector (SMA)
RF input of the device. The maximum input power is +20 dBm/10 V DC.
Risk of instrument damage
Do not overload the maximum allowed input of +20 dBm.
Non-compliance destroys the input mixer.
Docking connector
Connector for the battery pack unit TSMA6/B-BP.
4.3

Built-In GPS receiver

The integrated multi-GNSS (GPS / BeiDou / Galileo / GLONASS) receiver allows
to use three satellite systems in parallel. It offers an accuracy improvement of 30
% to 50 % by using a second constellation of satellites.
Following combinations are allowed:
● GPS only
● GPS / GLONASS / Galileo
Getting Started 4900.8040.02 ─ 10
Instrument tour
Built-In GPS receiver
34