Connecting To The Vehicle Power Supply Via Terminal - R&S TSMA6 Getting Started

®
R&S TSMA6
2. Connect the 7-pin connector to DC IN.
3. Connect the cigarette lighter adapter to the 12 V outlet of the vehicle.
3.7.2

Connecting to the vehicle power supply via terminal

To connect vehicle power supply via terminal
1. Ensure that the rating of the DC supply network matches the requirements
printed on the casing next to the DC input, see (8) in
2. Demount the cigarette lighter adapter from the cable.
3. Connect the open ends of the cable to the DC supply.
Ensure that the polarity is correct. (see
Figure 3-1: Supplied power cable with cigarette lighter adapter
+12 V DC = green/yellow cabling
GND = brown/white cabling
Getting Started 4900.8040.02 ─ 10
Figure
Figure 3-1).
Preparing for use
Connecting to power
4-2.
19