Connecting With R&S Tsma6 Wlan Access Point - R&S TSMA6 Getting Started

®
R&S TSMA6
Figure 3-5: Power button
For the power state LEDs, see
For a coldstart, hold the power on/off button at least 5 s.
3.9 Connecting with R&S TSMA6 WLAN access
point
The R&S TSMA6 has a built-in WLAN access point. For configuration, see the
R&S TSMA6 user manual.
The usage of WLAN is restricted to indoor use.
1. On the host PC, click the Network symbol in the task bar.
2. Select the correct WLAN (in this example: TSMA6-101084).
Getting Started 4900.8040.02 ─ 10
Connecting with R&S TSMA6 WLAN access point
Chapter 4.5, "Status
Preparing for use
LEDs", on page 35 .
24