Connecting To An Ac Power Supply; Connecting To A Battery Pack - R&S TSMA6 Getting Started

®
R&S TSMA6
3.7.3

Connecting to an AC power supply

If you operate the product with an external power supply, you can use it indoors
only in pollution degree 2 environments where nonconductive contamination can
occur. Suitable AC power supplies are listed in the data sheet. They differ in the
output power:
● R&S TSME-Z1 has an output power of about 30 W, sufficient for up to two
products, one TSME6 and one TSME30/44DC.
● R&S TSMA6-Z1 has an output power of 105 W and is suitable for multiple
TSMx products.
1. Ensure that the required ratings listed in the data sheet are matched.
2. Connect the round connector to DC IN.
3. Insert the AC power plug into a power outlet with ground contact.
3.7.4

Connecting to a battery pack

You can use the R&S TSMA6-BP battery pack as power supply.
If the R&S TSMA6 is not used for more than one day, remove the batteries
from R&S TSMA6-BP to prevent discharge. For details, see the manual of
the R&S TSMA6-BP battery pack.
To connect a battery pack
1. Remove the cover cap from the docking connector of the R&S TSMA6/6B.
Getting Started 4900.8040.02 ─ 10
Preparing for use
Connecting to power
20