Connecting Antennas; Connecting Devices For Local Operation; Connecting To Power; Connecting To A Vehicle Dc Power Supply Via Cigarette Lighter - R&S TSMA6 Getting Started

®
R&S TSMA6
3.5

Connecting antennas

The SMA connector is sensitive to mechanical stress. Use the following
handling precautions.
●
Always use a torque wrench and mount the cable end with 60 Ncm.
●
Do not stack adapters directly at the SMA connector. If you need to use
adapters (e.g: SMA to N), then always use a specific adapter cable
(R&S no. 4900.1700.00).
To connect RF and GPS antenna
1. Connect the RF antenna to the RF IN connector (see
2. Connect the GPS antenna to the GPS ANT port (see
3.6

Connecting devices for local operation

To connect devices
► Connect mouse and keyboard to the USB 2.0 ports (see
a monitor to the appropriate monitor port (HDMI, USB-C) (see
9).
3.7

Connecting to power

This section describes how to connect the R&S TSMA6 to a power supply unit.
3.7.1 Connecting to a vehicle DC power supply via cigarette
lighter
The R&S TSMA6 is delivered with a 12 V DC power supply cable with a cigarette
lighter connector.
1. Check the rating of the vehicle DC power supply. It has to be 12 V.
Getting Started 4900.8040.02 ─ 10
Preparing for use
Connecting to power
Figure 4-2 - 14).
Figure 4-2 - 4).
Figure 4-2 - 11) and
Figure 4-2 - 13,
18