Messages - AGFA DX-D 100 User Manual

DX-D 100 | Introduction | 35

Messages

Under certain conditions the system shows a dialog box in the middle of the
screen containing a message, or a message is displayed in a fixed message area
in the user interface. This message informs the user that either a problem has
occurred or that a requested action cannot be performed. The user must read
these messages carefully. It will provide information on what to do from then
on. This will be either performing an action to resolve the problem or to
contact the service organization. Details on the contents of messages can be
found in the service documentation which is available to service personnel.
0187K EN 20191024 1609