Table of Contents
Advertisement
DX-D 300 | Introduction | 37
Messages
Messages are displayed on the NX workstation monitor, on the touch screen
console in the operator room or on the control panel.
Special messages are displayed in a dialog box in the middle of the screen or in
a fixed part of the screen. This message will tell that either a problem has
occurred or that a requested action cannot be performed.
The user must read these messages carefully. They will provide information on
what to do from then on. This will be either performing an action to resolve
the problem or to contact the Agfa service organization.
Details on the contents of messages can be found in the service
documentation which is available to Agfa service personnel.
0172E EN 20181116 1653
Advertisement
Table of Contents
