Managing The Rfid Reader For User Authentication - AGFA DX-D 100 User Manual

Managing the RFID reader for user authentication

In order for a user to be able to log in to Windows using his personal RFID key,
the user must be configured on the DX-D 100.
Each RFID key must be linked to a Windows user account.
Multiple RFID keys can be linked to the same Windows user account.
An RFID key can be configured on more than one DX-D 100 system.
Topics:
• Adding an RFID key card to the configuration of the RFID reader
• Updating the password of a user
• Removing an RFID key card from the configuration of the RFID reader
• Copying the configuration of the RFID reader to another DX-D 100
system
Adding an RFID key card to the configuration of the RFID reader
1. On the NX workstation, go to the Main Menu.
2. Click the Show Desktop action button.
The Windows desktop is shown.
3. Go to the Windows Start menu > Aloaha > Keycard Credentials and
click Keycard Credentials.
The Keycard Credentials dialog is displayed.
Figure 18: Keycard Credentials
4. Enter the Windows username
5. Enter the domain name if needed.
For a local user, leave the field blank.
6. Enter the password.
7. Enter the password again.
DX-D 100 | Getting started | 65
0187K EN 20191024 1609