Messages - AGFA DX-D User Manual

DX-D Software Console | Introduction to the DX-D Software Console | 17

Messages

Error codes indicate the potential cause of a system failure. Error codes are
shown on the software console. Correct the cause of the error and press the
"CONT." button until its indication disappears.
All these error codes will enable the operator to indirectly convey the possible
source of error to service personnel. This may prevent the need for a service
call or enable service personnel to anticipate corrective actions prior to
arriving on site.
Figure 6: Example of error code
0189D EN 20180329 1421