Acpi Configuration - DFI CMS310-Q470E User Manual

Advanced
X

ACPI Configuration

InsydeH2O Setup Utility
Advanced
ACPI Configuration
Wake On PME/LAN <Disabled>
Wake On RTC <Disabled>
After G3 <Always On>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Wake On PME/LAN
Enable or Disable this field to allow LAN signal to power up the system.
Wake On RTC
When Enabled, the system will automatically wake up from S4/S5 state at a designated time
every day via the Real-time clock (RTC) battery.
[Wake up hour/minute/second]
Configure the time of day the system will wake on RTC. This field will only appear when "Wake
On RTC" is enabled.
After G3
This field is to specify what state the system should be in when power is re-applied after a
power failure.
• Always On The system automatically powers on after power failure.
• Always Off The system remains power off after power failure. Power-on signal input is re-
quired to power up the system.
• Last State The system remains last state before power off after power failure.
User's Manual | CMS310
Rev. 5.0
Determines the action tak-
en when the system power
i s o f f a n d a P C I P o w e r
Management Enable wake
up event occurs.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
InsydeH2O Setup Utility
Advanced
ACPI Configuration
Wake On PME/LAN <Enabled>
Wake On RTC <Enabled>
Wake up hour [0]
Wake up minute [0]
Wake up second [0]
After G3 <Always On>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Chapter 3
BIOS SETTINGS
Rev. 5.0
Wake on RTC from S4/S5
in everyday. It will over-
ride the OS schedule for
RTC wake.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
35