System Agent (Sa) Configuration; Me Configuration - DFI CMS310-Q470E User Manual

Advanced
X

System Agent (SA) Configuration

InsydeH2O Setup Utility
Advanced
System Agent (SA) Configuration
VT-d
Control Iommu Pre-boot Behavior
Above 4GB MMIO BIOS assignment
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
VT-d
Enable or disable VT-d capability
Control Iommu Pre-boot Behavior
Enable or disable dTBT and PCH USB topology IOMMU in Pre-boot environment.
Above 4GB MMIO BIOS assignment
Switch MemoryMappedIO BIOS assignment above 4GB.
User's Manual | CMS310
Rev. 5.0
U S B k e y b o a r d / m o u s e / s t o r a g e
support under UEFI environ-
ment.
<Enabled>
<Disabled IOMMU>
<Disabled>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Advanced
X

ME Configuration

InsydeH2O Setup Utility
Advanced
USB Configuration
ME State <Enabled>
Me Fw Image Re-Flash <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
ME State
When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.
Me Fw Image Re-Flash
This field is used to enable or disable the flash ME region.
Chapter 3
BIOS SETTINGS
Rev. 5.0
When Disabled ME will be put
into ME Temporarily Disabled
Mode.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
40