Console Redirection - DFI CMS310-Q470E User Manual

Advanced
X

Console Redirection

Configure COM port serial settings in the submenu.
InsydeH2O Setup Utility
Advanced
Console Redirection Setup
Console Serial Redirect <Enabled>
Terminal Type <VT_100>
Baud Rate <115200>
Data Bits <8 Bits>
Parity <None>
Stop Bits <1 Bit>
Flow Control <None>
►COM1
Enable VT-100, 115200, N81
►COM2
Disable VT-100, 115200, N81
►COM3
Disable VT-100, 115200, N81
►COM4
Disable VT-100, 115200, N81
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Console Serial Redirect
Enable or disable Console Serial Redirect.
Terminal Type
Select terminal type — VT_100, VT_100+, VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate — 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data Bits
Select data bits — 7 bits or 8 bits.
Parity
Select parity bits — none, even or odd.
Stop Bits
Select stop bits — 1 bit or 2 bits.
Flow Control
Select flow control type — none, RTS/CTS or XON/XOFF.
User's Manual | CMS310
Rev. 5.0
E n a b l e C o n s o l e R e d i r e c t i o n
Function
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
X COM1/COM2/COM3/COM4
Configure individual COM port serial settings in the submenu.
InsydeH2O Setup Utility
Advanced
COM1
Port Enable <Enabled>
UseGlobalSetting <Enabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Port Enable
This field is used to enable or disable the COM port to redirect the console.
Use Global Setting
This field is to enable or disable using the global setting. When "Use Global Setting" is enabled,
settings of the current port will dependent on Console Redirection settings. When "Use Global
Setting" is disabled, settings of the current port can be configured independently in this section.
Chapter 3
BIOS SETTINGS
Rev. 5.0
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
44