Table of Contents
Advertisement
▲ Advanced
RC ACPI Configuration
Wake system from S5 via RTC
When Enabled, the system will automatically power up at a designated time every day. Once it's
switched to [Enabled], please set up the time of day — hour, minute, and second — for the
system to wake up.
State After G3
Select between S0 State, and S5 State. This field is used to specify what state the system is
set to return to when power is re-applied after a power failure (G3 state).
S0 State
The system automatically powers on after power failure.
S5 State
The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
Last State The system returns to the last state right before power failure.
User's Manual | CMS631-Q470E/H420E
▲ Advanced
CPU Configuration
Intel (VMX) Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabilities pro-
vided by Vanderpool Technology.
Active Processor Cores
Select number of cores to enable in each processor package: all or 1.
Hyper-threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading technol-
ogy. Select disabled for other OSes not optimized for Hyper-Threading technology. When dis-
abled, only one thread per enabled core is enabled.
Chapter 3
BIOS SETTINGS
28
28
Advertisement
Table of Contents
