Rc Acpi Configuration; Cpu Configuration - DFI EHL556 User Manual

► Advanced

RC ACPI Configuration

Aptio Setup - AMI
Advanced
RC ACPI Configuration
Wake system from S5 via RTC [Enabled]
Wake up hour 0
Wake up minute 0
Wake up second 0
State After G3 [S0 State]
Version 2.22.1282. Copyright (C) 2022 AMI
Wake system from S5
When Enabled, the system will automatically power up at a designated time every day. Once it's
switched to [Enabled], please set up the time of day — hour, minute, and second — for the
system to wake up.
State After G3
This field is to specify what state the system should be in when power is re-applied after a
power failure (G3, the mechanical-off, state).
User's Manual | EHL556
► Advanced

CPU Configuration

CPU Configuration
Enable or disable System
wake on alarm event. When
Intel (VMX) Virtualization
enabled, System will wake
Technology
on the hr::min::sec speci-
Active Processor Cores
fied
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Intel (VMX) Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabilities pro-
vided by Vanderpool Technology.
Active Processor Cores
Select number of cores to enable in each processor package.
Aptio Setup - AMI
Advanced
[Enable]
[All]
Version 2.22.1282. Copyright (C) 2022 AMI
Note:
Some of the fields may not be available when the features are not supported by
the equipped CPU.
Chapter 3
BIOS SETTINGS
When enabled, a VMM can
utilize the additional hard-
ware capabilities provided
by Vanderpool Technology.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
28