Introducing The Hp Procurve Switch 2650 - HP ProCurve 2650 Install Manual

Introducing the HP Procurve Switch 2650

The HP Procurve Switch 2650 is a multiport switch that can be used to build
high-performance switched workgroup networks. This switch is a store-and-
forward device that offers low latency for high-speed networking.
HP Procurve Switch 2650 (HPJ4899A)
hp procurve 2 4 6 8
1 3 5 7
switch
2650 1
J4899A
Self
Test
Lnk
Port
LED
Act
View
Power
Fan
FDx
Status
Spd
Fault
Spd mode: off = 10 Mbps, flash = 100 Mbps, on = 1000 Mbps
Reset Clear
Throughout this manual, this switch will be abbreviated as the Switch 2650.
The Switch 2650 has 48 auto-sensing 10/100Base-TX RJ-45 ports and two dual-
personality ports—either auto-sensing 10/100/1000Base-T RJ-45 or mini-
GBIC.
This switch is designed to be used primarily as a high-density wiring closet or
desktop switch. With this switch you can directly connect computers, printers,
and servers to provide dedicated bandwidth to those devices, and you can
build a switched network infrastructure by connecting the switch to hubs,
other switches, or routers. In addition, the Switch 2650 offers full network
management capabilities.
This chapter describes your HP Switch 2650 including:
■
■
10 12 14 16 18 20 22
9 11 13 15 17 19 21 23
15 17
16 18
10/100Base-TX Ports (1 - 48)
Front and back of the switch
Switch features
24 26 28 30 32 34 36 38
25 27 29 31 33 35 37
31 33
32 34
1
40 42 44 46 48
39 41 43 45 47
47
M M
49 50
T T
48
!
Use only one (T or M) for each Gigabit port
1-1
Gig-T
Ports
Mini-
GBIC
Ports