Download Print this page

HP ProCurve 2650 Install Manual: Wall Mounting

Hp procurve 2650: install guide.
Hide thumbs


Install additional

Wall Mounting

You can mount the switch on a wall as shown in the illustrations on the next
W a r n i n g
For safe operation, do not install the switch with the back face of the
switch (with the fan vents) facing either downward or upward.
C a u t i o n
The switch should be mounted only to a wall or wood surface that is at least
1/2-inch plywood or its equivalent.
Install the other number 12-24 screw into the upper hole in each bracket.
Tighten these screws.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Attach the switch to the wall or wood surface with two 5/8-inch number
12 wood screws (not included).
Installing the Switch 2650
Installation Procedures


   Related Manuals for HP ProCurve 2650

This manual also for:

J4899b, J4899c, J8165a

Comments to this Manuals

Symbols: 0
Latest comments: