Installing The Switch 2650; Included Parts - HP ProCurve 2650 Install Manual

Installing the Switch 2650

The HP Switch 2650 is easy to install. It comes with an accessory kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack,
in an equipment cabinet, or on a wall, and with rubber feet that can be attached
so the switch can be securely located on a horizontal surface. The brackets
are designed to allow mounting the switch in a variety of locations and
orientations.
This chapter shows you how to install your Switch 2650.

Included Parts

The Switch 2650 has the following components shipped with it:
■
■
■
■
■
■
■
HP Procurve Switch 2650 Installation and Getting Started Guide
(J4899-90001), this manual
HP Procurve Product Documentation CD ROM
(contains PDF file copies of the documentation for the Switch 2650,
including the Management and Configuration Guide, and for most other
HP Procurve switches)
HP TopTools for Hubs & Switches - CD ROM and booklet
Console cable
Customer Support/Warranty booklet
Accessory kit (5064-2085)
• two mounting brackets
• four 8-mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
Power cord, one of the following:
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
United States/Canada/Mexico
8120-6803
8120-8377
8120-6802
8120-6806
8120-6804
8120-6807
8120-8709
8120-6805
2
2-1