Saving Configurations While Using The Cli; Hp Procurve Switch Software Key - HP ProCurve 4100GL Series Operating

Saving Configurations While Using the CLI

The switch operates with two configuration files:
Running-Config File: Exists in volatile memory and controls switch operation. Rebooting
the switch erases the current running-config file and replaces it with an exact copy of the
current startup-config file. To save a configuration change, you must save the running
configuration to the startup-config file.
Startup-Config File: Exists in flash (non-volatile) memory and preserves the most recently-
saved configuration as the "permanent" configuration. When the switch reboots for any
reason, an exact copy of the current startup-config file becomes the new running-config file
in volatile memory.
When you use the CLI to make a configuration change, the switch places the change in the running­
config file. If you want to preserve the change across reboots, you must save the change to the startup­
config file. Otherwise, the next time the switch reboots, the change will be lost. There are two ways
to save configuration changes while using the CLI:
write memory
Execute
When exiting from the CLI to the Main Menu, press
configuration" prompt:
Do you want to save current configuration [y/n]?

HP ProCurve Switch Software Key

Software HP ProCurve Switch
Letter
C 1600M, 2400M, 2424M, 4000M, and 8000M
E Switch 5300xl Series (5304xl, 5308xl, 5348xl, and 5372xl)
F Switch 2500 Series (2512 and 2524), Switch 2312, and Switch 2324
G Switch 4100GL Series (4104GL, 4108GL, and 4148GL)
H Switch 2600 Series (2626 and 2650) and Switch 6108
I Switch 2800 Series (2824 and 2848)
N/A Switch 9300 Series (9304M, 9308M, and 9315M), Switch 6208M-SX and
Switch 6308M-SX (Uses software version number only; no alphabetic
prefix. For example 07.6.04.)
from the Manager, Global, or Context configuration level.
Saving Configurations While Using the CLI
[ Y ]
(for Yes) when you see the "save
Software Management
5