Download Print this page

HP ProCurve 10 Installation Manual: Introducing The Hp Procurve 10/100 Hubs

Switches and hubs.
Hide thumbs


Introducing the HP ProCurve 10/100 Hubs

The HP ProCurve 10/100 hubs are low-cost multiport, dual-speed (10- and 100-
Mbps) repeaters that can be used to build high-performance workgroup
networks. These hubs are autosensing and autonegotiating devices that
provide the flexibility of adjusting to different network connection speed
settings. The hub ports always operate at half-duplex.
There are four hub models. Two are managed:
and two are unmanaged:
Throughout this manual, these hubs will be abbreviated as the HP 10/100 hubs,
or they may be described as the Hub 12, Hub 24, Hub 12M, and Hub 24M.
With these hubs you can build a network infrastructure by connecting the hubs
to other hubs, switches, or routers, or you can directly connect computers,
printers, and servers to these hubs to provide shared 10- or 100-Mbps band-
width to those devices.
This chapter describes your HP 10/100 hubs:
HP ProCurve 10/100 Hub 12M (HP J3288A)
HP ProCurve 10/100 Hub 24M (HP J3289A)
HP ProCurve 10/100 Hub 12 (HP J3294A)
HP ProCurve 10/100 Hub 24 (HP J3295A)
Front and back of the hubs
Network Ports
Port and Hub LEDs
Hub operation overview



This manual also for:

Procurve 100

Comments to this Manuals

Symbols: 0
Latest comments: