Checking The Drives For Data Consistency - Asus TS100-E3 Manual

5.2.5 5.2.5

Checking the drives for data consistency

Checking the drives for data consistency
5.2.5 5.2.5 5.2.5 Checking the drives for data consistency Checking the drives for data consistency Checking the drives for data consistency
You can check and verify the accuracy of data redundancy in the selected
logical drive. The utility can automatically detect and/or detect and correct
any differences in data redundancy depending on the selected option in the
O b j e c t s O b j e c t s A d a p t e r A d a p t e r
O b j e c t s O b j e c t s > A d a p t e r O b j e c t s A d a p t e r A d a p t e r menu.
The Check Consistency command is available only for logical drives included
in a RAID 1 set.
Using the Check Consistency Using the Check Consistency Using the Check Consistency Using the Check Consistency Using the Check Consistency
To check data consistency using the C h e c k C o n s i s t e n c y
1. From the Management Menu, select C h e c k C o n s i s t e n c y
<Enter>.
2. The screen displays the available RAID set(s) and prompts you to select
the logical drive to check. Use the arrow keys to select the logical drive
from the L o g i c a l D r i v e L o g i c a l D r i v e L o g i c a l D r i v e selection, then press <Enter>. L o g i c a l D r i v e
L o g i c a l D r i v e
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
C h e c k C o n s i s t e n c y C h e c k C o n s i s t e n c y
C h e c k C o n s i s t e n c y C h e c k C o n s i s t e n c y command:
C h e c k C o n s i s t e n c y C h e c k C o n s i s t e n c y
C h e c k C o n s i s t e n c y C h e c k C o n s i s t e n c y, then press
5 - 2 1 5 - 2 1 5 - 2 1
5 - 2 1 5 - 2 1