Asus Crashfree Bios 2 Utility - Asus TS100-E3 Manual

4.1.3 4.1.3 4.1.3

ASUS CrashFree BIOS 2 utility

ASUS CrashFree BIOS 2 utility ASUS CrashFree BIOS 2 utility
4.1.3 4.1.3 ASUS CrashFree BIOS 2 utility ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You
can update a corrupted BIOS file using the motherboard support CD or the
floppy disk that contains the updated BIOS file.
• Prepare the motherboard support CD or the floppy disk containing the
updated motherboard BIOS before using this utility.
• Make sure that you rename the original or updated BIOS file in the
floppy disk according the exact name of your motherboard, e.g. P 5 M T -
M X / C . R O M . M X / C . R O M . M X / C . R O M . M X / C . R O M . M X / C . R O M .
Recovering the BIOS from a floppy disk Recovering the BIOS from a floppy disk Recovering the BIOS from a floppy disk Recovering the BIOS from a floppy disk Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk:
1. Turn on the system.
2. Insert the floppy disk with the original or updated BIOS file to the floppy
disk drive.
3. The utility displays the following message and automatically checks the
floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
The utility will read the BIOS file and start flashing the corrupted BIOS
file when the files are found.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file "P5MT-MX.ROM". Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing so
will cause system boot failure!
4. Restart the system after the utility completes the updating process.
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
P 5 M T - P 5 M T - P 5 M T -
P 5 M T -
4 - 5 4 - 5 4 - 5
4 - 5 4 - 5