Rebuilding Failed Drives - Asus TS100-E3 Manual

5.2.4 5.2.4

Rebuilding failed drives

Rebuilding failed drives
5.2.4 5.2.4 5.2.4 Rebuilding failed drives Rebuilding failed drives Rebuilding failed drives
You can manually rebuild failed hard disk drives using the R e b u i l d
in the Management Menu.
To rebuild a failed hard disk drive:
1. From the Management Menu, highlight R e b u i l d
2. The P H Y S I C A L D R I V E S S E L E C T I O N M E N U P H Y S I C A L D R I V E S S E L E C T I O N M E N U displays the available P H Y S I C A L D R I V E S S E L E C T I O N M E N U P H Y S I C A L D R I V E S S E L E C T I O N M E N U P H Y S I C A L D R I V E S S E L E C T I O N M E N U
drives connected to the SATA ports. Select the drive you want to rebuild,
then press <SpaceBar>.
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3 A S U S T S 1 0 0 - E 3
R e b u i l d R e b u i l d command R e b u i l d
R e b u i l d
R e b u i l d R e b u i l d
R e b u i l d, then press <Enter>. R e b u i l d
5 - 1 9 5 - 1 9 5 - 1 9
5 - 1 9 5 - 1 9