System Memory; Overview; Memory Configurations - Asus TS100-E3 Manual

2.4

System memory

2.4.1 2.4.1 2.4.1

Overview

Overview Overview
2.4.1 2.4.1 Overview Overview
The motherboard comes with four Double Data Rate II (DDR2) Dual Inline
Memory Modules (DIMM) sockets to support 240-pin DDR modules.
The figure illustrates the location of the DDR DIMM sockets:
P5MT-MX/C 240-pin DDR2 DIMM Sockets
2.4.2 2.4.2 2.4.2 2.4.2 2.4.2

Memory configurations

Memory configurations Memory configurations Memory configurations Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC or non-ECC
DDR2-533/667 DIMMs into the DIMM sockets.
•
•
•
2 - 1 0 2 - 1 0 2 - 1 0
2 - 1 0 2 - 1 0
®
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR2 Qualified Vendors List at the
ASUS web site.
When installing one or two DIMMs, install the DIMM(s) to the blue slots
(DIMM_A2/DIMM_B2).
Three DDR DIMMs intalled into any three memory sockets will function
in single-channel mode.
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p