Asus TS100-E3 Manual page 84

Intel® pentium® 4/pentium® d lga775 pedestal pedestal server
Table of Contents

Advertisement

4.3.4
4.3.4
Primary, Third, and Fourth IDE Master/Slave
Primary, Third, and Fourth IDE Master/Slave
4.3.4
4.3.4
4.3.4
Primary, Third, and Fourth IDE Master/Slave
Primary, Third, and Fourth IDE Master/Slave
Primary, Third, and Fourth IDE Master/Slave
The items in this menu allow you to set or change the configurations for the
IDE devices installed in the system. Select an item then press <Enter> if you
want to configure the item.
Main
Primary IDE Master
Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
SMART Monitoring: Supported
Type
LBA/Large Mode
Block(Multi-sector Transfer) [Auto]
PIO Mode
DMA Mode
SMART Monitoring
32Bit Data Transfer
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
The BIOS automatically detects the values opposite the dimmed items (Device,
Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and
SMART monitoring). These values are not user-configurable. These items show
N/A if no IDE device is installed in the system.
Type [Auto]
Type [Auto]
Type [Auto]
Type [Auto]
Type [Auto]
Selects the type of IDE drive. Setting to [Auto] allows automatic selection of
the appropriate IDE device type. Select [CDROM] if you are specifically
configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device)
if your device is either a ZIP, LS-120, or MO drive.Configuration options: [Not
Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
LBA/Large Mode [Auto]
LBA/Large Mode [Auto]
LBA/Large Mode [Auto]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if
the device supports this mode, and if the device was not previously formatted
with LBA mode disabled. Configuration options: [Disabled] [Auto]
4 - 1 4
4 - 1 4
4 - 1 4
4 - 1 4
4 - 1 4
BIOS SETUP UTILITY
: Hard Disk
: HDS722516VLSA80
: 164.7GB
: Supported
: 16 Sectors
: Supported
: MultiWord DMA-2
: Ultra DMA-5
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Select the type of
device connected to
the system.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p

Advertisement

Table of Contents
loading

Table of Contents