Asus TS100-E3 Manual page 112

ARRAY SELECTION MENU ARRAY SELECTION MENU
3. The ARRAY SELECTION MENU ARRAY SELECTION MENU ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drives you want to include in the RAID set,
then press <SpaceBar>. When selected, the drive indicator changes from
R E A D Y R E A D Y
R E A D Y to ONLIN A[X]-[Y] R E A D Y R E A D Y
drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.
4. Select all the drives required for the RAID set, then press <Enter>.
The configurable array appears on screen.
5 - 6 5 - 6 5 - 6
5 - 6 5 - 6
ONLIN A[X]-[Y] ONLIN A[X]-[Y]
ONLIN A[X]-[Y], where X is the array number, and Y is the ONLIN A[X]-[Y]
C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n C h a p t e r 5 : R A I D c o n f i g u r a t i o n